[ Identification | Description | Input parameters | Links ]
MM_h ComponentA single pore is simulated, which may have thick walls. The top and bottom are curved cylindrically azimuthally, and according to the Wolter I optic lengthwise (sagitally). This is the hyperbolic part. The azimuthal curvature is defined by the radius parameters. To intersect the Wolter I plates we take advatage of the azimuthal symmetry and only consider the radial component of the photon's wavevector. Example: MM_h( pore_th=0, ring_nr=1, Z0=12, pore_width=0.83e-3, pore_height=0.605e-3, chamfer_width=0.17e-3, mirror_reflec="mirror_coating_unity.txt", R_d=0, size_file="ref_design_breaks.txt")
| Name | Unit | Description | Default | |
| pore_th | m | Thickness of the pore walls (plates) | ||
| ring_nr | 1 | Ring number; selects the data block read from size_file | ||
| Z0 | m | Distance between intersection plane and the focal spot (essentially focal length). | ||
| pore_height | m | Height of the pore. (Hence the inner radii are radius_{m,h}-pore_height) | ||
| pore_width | m | Width of a single pore | ||
| chamfer_width | m | Width of side walls. | 0 | |
| gap | m | Gap between intersection with parabolic section and actual plate. | 0 | |
| zdepth | m | Currently not used by the component | 0 | |
| mirror_reflec | Data file containing reflectivities of the reflector surface (TOP). | "" | ||
| bottom_reflec | Data file containing reflectivities of the bottom surface (BOTTOM). | "" | ||
| side_reflec | Data file containing reflectivities of the side walls (LEFT and RIGHT). | "" | ||
| size_file | str | Table file with the per-ring geometry, read with block number ring_nr | "" | |
| non_specular_file | str | Data file describing non-specular reflectivity | "" | |
| R_d | Default reflectivity value to use if no reflectivity file is given. Useful f.i. is one surface is reflecting and the others absorbing. | 1 | ||
| waviness | rad | Waviness of the reflecting surface. The slope error is assumed to be uniformly distributed in the interval [-waviness:waviness]. | 0 | |
| longw | 1 | If non-zero, waviness is 1D and along the pore axis. | 0 |
| AT ( | , | , | ) RELATIVE | |||
|---|---|---|---|---|---|---|
| ROTATED ( | , | , | ) RELATIVE |
MM_h.comp.
[ Identification | Description | Examples | Input parameters | Links ]
Generated on mcxtrace 3.9.0