About McXtrace
Publications
Project Partners
Project People
Goal
Documentation
Manual
Commands
Wiki (GitHub)
Tutorial
[ Identification | Description | Input parameters | Links ]
The Lens_CRL_RTM Component
1D CRL stack based on RTM formalism
Identification
- Site:
- Author: Erik Knudsen
- Origin: DTU Physics
- Date: Jan '21
Description
A CRL stack component based on the formalism presented by Simons et.al. J. Synch. Rad. 2017, vol. 24. We model a 1D lens stack focusing in the y-direction. I.e. invariant along x.
Input parameters
Parameters in boldface are required; the others are optional.| Name | Unit | Description | Default | |
| r | m | Radius of curavature at the lens apex. | 0.5e-3 | |
| d | 0.1e-3 | |||
| material | m | Datafile containing f1 constants | "Be.txt" | |
| N | m | Number of lenslets in the stack. | 1 | |
| zdepth | m | Thickness of a single lenslet. | 2e-3 | |
| yheight | m | Height of lens opening. If zero this is set by the lens thickness. | 1e-3 | |
| xwidth | m | Width of the lenslets. | 1.2e-3 | |
| fast | m | Use fast calculation - should be off for better display with mxdisplay | 1 |
| AT ( | , | , | ) RELATIVE | |||
|---|---|---|---|---|---|---|
| ROTATED ( | , | , | ) RELATIVE |
Links
- Source code for
Lens_CRL_RTM.comp.
[ Identification | Description | Input parameters | Links ]
Generated on 2023-12-19 19:37:45
