About McXtrace
Publications
Project Partners
Project People
Goal
Documentation
Manual
Commands
Wiki (GitHub)
Tutorial
[ Identification | Description | Input parameters | Links ]
The Union_cylinder Component
A sample component to separate geometry and physics
Identification
- Site:
- Author: Mads Bertelsen and Erik B Knudsen
- Origin: ESS DMSC & DTU Physics
- Date: 20.08.15
Description
Part of the Union components, a set of components that work together and thus separates geometry and physics within McXtrace. The use of this component requires other components to be used. 1) One specifies a number of processes using process components 2) These are gathered into material definitions using Union_make_material 3) Geometries are placed using Union_box/cylinder/sphere, assigned a material 4) A Union_master component placed after all of the above Only in step 4 will any simulation happen, and per default all geometries defined before this master, but after the previous will be simulated here. There is a dedicated manual available for the Union components The position of this component is the center of the cylinder, and it thus extends yheight/2 up and down along y axis. It is allowed to overlap components, but it is not allowed to have two parallel planes that coincide. This will crash the code on run time.
Input parameters
Parameters in boldface are required; the others are optional.| Name | Unit | Description | Default | |
| material_string | material name of this volume, defined using Union_make_material | 0 | ||
| priority | 1 | priority of the volume (can not be the same as another volume) A high priority is on top of low. | ||
| radius | m | Outer radius volume in (x,z) plane | ||
| yheight | m | Cylinder height in (y) direction | ||
| visualize | 1 | set to 0 if you wish to hide this geometry in mcdisplay | 1 | |
| target_index | 0 | |||
| target_x | m | 0 | ||
| target_y | m | Position of target to focus at | 0 | |
| target_z | m | 0 | ||
| focus_aw | deg | horiz. angular dimension of a rectangular area | 0 | |
| focus_ah | deg | vert. angular dimension of a rectangular area | 0 | |
| focus_xw | m | horiz. dimension of a rectangular area | 0 | |
| focus_xh | m | vert. dimension of a rectangular area | 0 | |
| focus_r | m | focusing on circle with this radius | 0 | |
| p_interact | 1 | probability to interact with this geometry [0-1] | 0 | |
| mask_string | Comma seperated list of geometry names which this geometry should mask | 0 | ||
| mask_setting | "All" or "Any", should the masked volume be simulated when the ray is in just one mask, or all. | 0 | ||
| number_of_activations | 1 | Number of subsequent Union_master components that will simulate this geometry | 1 |
| AT ( | , | , | ) RELATIVE | |||
|---|---|---|---|---|---|---|
| ROTATED ( | , | , | ) RELATIVE |
Links
- Source code for
Union_cylinder.comp.
[ Identification | Description | Input parameters | Links ]
Generated on 2023-12-19 19:37:45
