About McXtrace
Publications
Project Partners
Project People
Goal
Documentation
Manual
Commands
Wiki (GitHub)
Tutorial
14.14 The Pore_h McXtrace Component
Single Pore as part of the Silicon Pore Optics (SPO) as envisioned for the ATHENA+ space telescope.
Identification
-
Author: Erik B Knudsen and Desiree D. M. Ferreira
-
Origin: DTU Physics, DTU Space
-
Date: Feb. 2016
Description
A single pore is simulated, which may have thick walls. The top and bottom are curved cylindrically azimuthally, and according to the Wolter I optic lengthwise (sagitally). This is the hyperbolic part. The azimuthal curvature is defined by the radius parameters. This refers to the center of the pore. I.e the top and bottom plates have radius of curvature <radius+yheight/2> and <radius-yheight/2> respectively.
To intersect the Wolter I plates we take advatage of the azimuthal symmetry and only consider the radial component of the photon’s wavevector.
Example: Pore_h( radius_m=0.286148, radius_h=0.284333, zdepth=0.101504, Z0=12, xwidth=0.83e-3, yheight=0.605e-3, mirror_reflec=”mirror_coating_unity.txt”, R_d=0)
Input parameters
Parameters in boldface are required; the others are optional.
|
Name |
Unit |
Description |
Default |
|
|
|||
|
radius_m |
m |
Ring radius of the upper (reflecting) plate of the pore at the intersection with the parabolic section. |
|
|
radius_h |
m |
Ring radius of the upper (reflecting) plate of the pore at the edge closest to the focal point. |
|
|
Z0 |
m |
distance between intersection plane and the focal spot( essentially the focal length). |
|
|
xwidth |
m |
Width of the pore. |
|
|
yheight |
m |
Height of the pore. (Thus the inner radius is radius_{m,h}-yehight. |
|
|
chamferwidth |
m |
Width of side walls. |
0 |
|
gap |
m |
gap between intersection with parabolic section and actual plate. |
0 |
|
zdepth |
m |
Currently not used by the component |
0 |
|
mirror_reflec |
|
Data file containing reflectivities of the reflector surface (TOP). |
”” |
|
bottom_reflec |
|
Data file containing reflectivities of the bottom surface (BOTTOM). |
”” |
|
side_reflec |
|
Data file containing reflectivities of the side walls (LEFT and RIGHT). |
”” |
|
R_d |
|
Default reflectivity value to use if no reflectivity file is given. Useful f.i. is one surface is reflecting and the others absorbing. |
1 |
|
waviness |
rad |
Waviness of the reflecting surface. The slope error is assumed to be uniformly distributed in the interval [-waviness:waviness]. |
0 |
|
longw |
1 |
If non-zero, waviness is 1D and along the pore axis. |
0 |
|
|
|||
|
|
|||
|
|
|||
Links
-
Component source code found in file Pore_h.comp.
